Product Description

Sabic M500026 belongs to a high flow linear low density polyethylene copolymer injection moulding grade with a narrow molecular weight distribution. LLDPE M500026 has been designed to have excellent low temperature toughness, stress crack resistance (ESCR), mouldability and gloss.

Typical Applications

Sabic LLDPE M500026 is recommended for injection moulding of containers and reclosure lids. It is well suited for fast cycle, deep draw injection moulding applications, which takes advantage of its high flow properties. Also, the higher melting point of the Sabic M500026 material allows for high end-use temperature when compared with conventional polyehtylenes of equal density.

Processing Conditions

Typical moulding conditions for LLDPE M500026 are:
Material temperature: 180 – 230 °C (355 – 446 °F)
Mould temperature: 5 – 30 °C (40 – 85 °F)

Properties Units SI Values Test methods
Polymer properties
Melt flow rate (MFR) ASTM D 1238
at 190 °C and 2.16 kg g/10 min 50
Density 1) kg/m³ 926 ASTM D 1505
Mechanical properties 1)
Tensile test ASTM D 638
stress at yield MPa 13
stress at break MPa 12.4
strain at break % 120
secant modulus at 1% elongation MPa 354
Izod impact notched at 23 °C J/m 450 ASTM D 256
Hardness Shore D 55 ASTM D 2240
ESCR (100% Igepal), F50 h 2 ASTM D 1693A
Thermal properties 1)
Vicat softening temperature

at 10 N (VST/A)

Brittleness temperature






< -75

ASTM D 1525


ASTM D 746

    Your Name *

    Your Email *

    Your Phone *

    Your Country

    Your Message *