Lotrene MG70 low density polyethylene ldpe (injection moulding grade) is mainly used for the injection of thin and flexible items and the preparation of masterbatches.
Main Applications of LDPE MG70
- Artificial flowers
- Metal coating
- Coating of textiles
- Masterbatches
PROPERTIES |
VALUE |
UNIT |
TEST METHOD |
Melt Flow Index |
70 |
g/10 min. |
ASTM D-1238 |
Density @ 23 °C |
0.918 |
g/cm3 |
ASTM D1505 |
Crystalline Melting Point |
102 |
°C |
ASTM E-794 |
Vicat Softening Point |
80 |
°C |
ASTM D-1525 |
Tensile Strength @ Yield |
8 |
MPa |
ASTM D-638 |
Tensile strength @ Break |
7 |
MPa |
ASTM D-638 |
Elongation @ Break |
240 |
% |
ASTM D-638 |
Processing
- This resin can be processed on all types of injection moulding machines.
- The high melt flow index of Lotrene MG70 leads to excellent flowability and processability.
- The items produced from this grade possess high flexibility and glossy surface.
- The temperatures and pressures used for the processing of LDPE MG70 are normal for the injection of low- density polyethylene of high melt flow index.
- The melt temperature range suggested is between 150 °C and 170 °C. However, optimum conditions are dependant on the equipment used (presses, moulds, etc.) and the articles under production (appearance, size, shape, etc.)