As one of China’s leading PET chips manufacturers, Wankai New Materials Co., Ltd. has been specializing in high-performance, food-grade Wankai PET resin. The company operates several large-scale PET production bases with an annual capacity exceeding 2 million tons, integrating advanced polymerization and purification technologies. The company is committed to sustainable development and continuous innovation in the polyester materials industry. So far, Wankai PET chips have been exported to over 70 countries and regions worldwide. 

Introduction of Wankai PET Resin

Wankai PET resin is in uniform milky white granules at room temperature, and has good stability, flame retardancy, etc. Its independently developed “bio-based high-transparency heat-resistant PEIT resin” has a temperature resistance of over 140°C, a light transmittance of 93%, and food-grade safety characteristics. Therefore, they are widely used in food packaging such as drinking water, hot canned beverages, carbonated beverages, edible oil, and alcohol, as well as packaging in the electronics and light industry fields such as films, sheets, industrial yarns, and cosmetics. 

Bottle Grade PET Resin

Wankai supplies a wide range of PET resin grades, including bottle-grade PET and non-bottle-grade PET, which are designed for applications such as film extrusion, BOPET production, fiber/yarn, photovoltaic backsheet materials, and other industrial uses.

The bottle grade Wankai pet resin can be widely used in the production of bottle packing containers. What’s more, these grades meets international food grade safety standards including compliance with EU regulations and FDA approval.

Product TypeAcetaldehyde Content (ug/g) Intrinsic Viscosity (dL/g)Melting point (℃)Recommended Applications
WK-801≤1.00.80± 0.015247±2Water bottles, snack bottles, cosmetics bottles, etc.
WK-801L≤1.00.77± 0.015247±2
WK-811≤1.00.79± 0.015251±2Tea bottles, flavouring bottles, etc.
WK-811L≤1.00.76± 0.015251±2
WK-821≤1.00.83± 0.015245±2Edible Oil bottles, medical bottles, etc.
WK-851≤1.00.88± 0.015245±2Sparkling beverage and CSD bottles
WK-881≤1.00.87± 0.015244±2
WK-901≤1.00.87± 0.015240±2Big size bottles
WK-781≤1.00.78± 0.015245±2Transparent containers

Non-bottle Grade PET Chips

These non-bottle grade PET chips have the characteristics of stable performance indicators, strong aging resistance and excellent processing performance. And they can be used to produce BOPET film, fiber or filament yarn, transparent photovoltaic back film.

Product TypeAcetaldehyde Content (ug/g)Intrinsic Viscosity (dL/g)Melting point (℃)Recommended Applications
WK-601≤1000.600± 0.02248±2Base PET for WK-801 and WK-801L
WK-611≤1000.600± 0.02253±2Base PET for WK-811 and WK-811L
WK-621≤1000.600± 0.02247±2Base PET for WK-821
WK-681—–0.645± 0.01254±2Film for solar panel
WK-711—–0.720±0.015250±2Enhanced film for solar panel
WK-631—–0.645±0.010254±2BOPET film and fiber/filament yarn
  1. High transparency & visual clarity. Produces bottles with high gloss and transparency, especially suitable for drinking water, beverages, cosmetics, and medical-grade packaging.
  2. Low acetaldehyde content (Low AA). Most bottle-grade PET grades feature ≤ 1 ppm AA, which helps preserve beverage flavor without causing smell or taste changes.
  3. Excellent mechanical strength & chemical stability. Higher IV ensures improved toughness, resistance to cracking, CO₂ retention, and durability under stress.
  4. Wide processing compatibility. Suitable for injection molding, stretch-blow molding, sheet extrusion, BOPET film production, fiber spinning, and industrial processing.
  5. Food-contact safety compliance. Meets major international food safety regulations (EU / FDA / GB standard compliance claimed).
  6. Good batch stability and consistency. Supported by continuous polymerization and SSP (Solid-State Polymerization) technology, ensuring uniform viscosity, melting point, transparency, and color tone.

Depending on grade selection, Wankai PET resin can be used in:

  • Drinking water bottles (purified/mineral/distilled water)
  • Carbonated beverage bottles and large-capacity containers
  • Hot-fill beverage packaging (juice, tea, sports drinks)
  • Edible oil bottles, alcoholic beverages, pharmaceutical and cosmetic packaging
  • APET sheets, thermoformed containers, blister packaging
  • Films (BOPET), photovoltaic backsheet materials
  • Polyester fibers, yarns, and technical textile applications

Selecting the appropriate Wankai PET resin depends on the intended application, processing method, and final product requirements. The key is to match resin characteristics such as intrinsic viscosity (IV), acetaldehyde content (AA), thermal stability, transparency, and compliance with the end-use specifications.

  • Define end-use clearly: water bottle, carbonated drink, hot-fill, oil bottle, sheet/film, fiber, industrial packaging, etc.
  • List key performance requirements: mechanical strength, clarity, heat resistance, chemical stability, processing method, and transparency.
  • Consult PET specifications: IV, AA, melting point, transparency, and match them to the desired grade.
  • Request technical data sheets (TDS) / certificates of analysis (COA) from the supplier and, if possible, conduct small-batch trials to verify mechanical properties, transparency, gas barrier, and taste migration.
  • Ensure proper processing: PET must be thoroughly dried before melt processing to avoid hydrolysis, molecular weight reduction, and haze formation.
  • Select grade according to performance requirements: For high-pressure, carbonation, hot-fill, or high-clarity applications, consider higher IV grades or specialty/non-standard PET as needed.

Why Leading Brands Choose Wankai PET Resin

Wankai PET Resin is preferred by many global and regional packaging companies because it offers:

  • Stable and food-safe properties (low AA, high optical clarity).
  • Good mechanical strength and molding ability.
  • Versatility across beverage, food, cosmetic, and industrial markets
  • Competitive cost structure with large production scale.
  • Sustainability and recyclability aligned with global policies.

    Your Name *

    Your Email *

    Your Phone *

    Your Country

    Your Message *