PP Borouge BD950MO is a heterophasic polypropylene random copolymer specifically engineered for injection moulding and compression moulding applications, especially widely used in packaging, industrial components, consumer goods, and food-contact applications. Produced using Borouge’s advanced manufacturing technology, the grade incorporates Borealis Nucleation Technology (BNT), which enhances crystallization speed, improves dimensional stability, and shortens moulding cycles. The key features of PP BD950MO are excellent processability, high melt strength and minimal potential for stress whitening.

Property

Typical Value

Test Method

Density

900–910 kg/m³

ISO 1183

Melt Flow Rate (230 °C/2.16 kg)

7 g/10 min

ISO 1133

Tensile Modulus

1500 MPa

ISO 527-2

Tensile Stress at Yield

30 MPa

ISO 527-2

Tensile Strain at Yield

6%

ISO 527-2

Flexural Modulus

1450 MPa

ISO 178

Charpy Notched Impact Strength (23 °C)

8 kJ/m²

ISO 179

Charpy Notched Impact Strength (–20 °C)

4 kJ/m²

ISO 179

Vicat Softening Temperature

149 °C

ISO 306

Heat Deflection Temperature (0.45 MPa)

100 °C

ISO 75

Performance Advantages of Borouge BD950MO

  1. High Stiffness–Impact Balance. The heterophasic copolymer structure provides enhanced impact resistance while maintaining good rigidity, making it suitable for functional mechanical parts.

2. Excellent Processability.

  • High melt flow characteristics ensure smooth filling, consistent moulding performance, and suitability for high-speed production lines.
  • BNT technology provides fast crystallization, shorter cooling times, and improved cycle efficiency.

3. Superior Appearance & Dimensional Stability

  • Very low tendency to stress whitening under torsion or bending.
  • Excellent dimensional consistency and stable colour response during pigmentation.

4. Optimized Surface & Handling Properties

  • Slip additive improves mould release and reduces friction, enabling smooth cap opening performance.
  • Antistatic properties reduce dust pick-up and improve product cleanliness.

5. Food-Contact Compliance. PP Borouge BD950MO meets applicable food-contact regulations, making it suitable for beverage and food packaging components.

Main Applications

BD950MO features the dual advantages of “rigidity-impact balance” and “efficient processing” and is widely suitable for industrial scenarios with high requirements for dimensional stability, wear resistance, and production efficiency.

  • Packaging Industry: Screw caps and flip caps are primarily used for carbonated beverages (CSDs), water, juice, and other products. These caps have become a mainstream choice due to their precise torque control and chemical resistance (tolerance to the acidic and alkaline environments of beverages).
  • Electrical and Electronics: Used in mobile phone accessories, laptop frames, and connector housings, their antistatic properties protect circuits from static damage, while low wear extends device life.
  • Automotive and Consumer Goods: Manufactured for automotive interiors and home appliance housings (such as smart home control panels), their balanced rigidity and impact resistance enhance product durability.

Selection Recommendations

When choosing Borouge PP BD950MO, consider the following factors:

  • Required balance between stiffness and impact strength.
  • Need for fast moulding cycles or thin-wall performance.
  • Sensitivity to stress whitening or surface appearance.
  • Slip/torque requirements for caps and closures
  • Compliance with food-contact regulations.
  • Compatibility with masterbatch and final part colour requirements.
  • widely used in packaging, industrial components, consumer goods, and food-contact applications.

    Your Name *

    Your Email *

    Your Phone *

    Your Country

    Your Message *